Hem Incense Gift Pack #4 - 180 Pc – Money Drawing, Good Luck & Good Fortune with Wooden Holders

Hold the incense stick by the uncoated (bare) wooden end. Bring a flame (lighter, match, or candle) to the coated tip. Once the tip glows red with a steady ember, gently blow out the flame — you want a glowing ember, not an open flame. Place the stick in an incense holder angled slightly, so ash catches in the tray. Burn for 20–40 minutes until consumed.

Hold the cone by the wider base. Apply a flame to the pointed tip and hold it there for 5–10 seconds until the tip catches and glows. Gently blow out the visible flame — a steady red ember should remain. Set the cone on a heat-resistant holder or sand-filled burner. Cones burn downward and typically last 20–40 minutes. Backflow cones (with a hollow channel) work only in backflow burners with a drainage hole.

Standard incense sticks: 20–40 minutes on average, up to 60–90 minutes for premium and hand-rolled sticks like our Aum Bambooless line. Incense cones: 20–40 minutes depending on size. Backflow cones: 10–15 minutes (shorter because of the hollow channel). Humidity and stick thickness affect burn time by ±25%. Always burn on a heat-safe holder.

Bamboo-core incense uses a thin bamboo stick coated in fragrance paste — the standard construction, inexpensive, but the bamboo releases a faint woody smoke layer that can alter the intended fragrance profile. Bambooless incense (like our Aum Bambooless line) is 100% fragrance paste hand-rolled without a core — the scent profile is purer and cleaner because nothing but the intended ingredients burns.

Yes — always use a heat-resistant incense holder designed to catch ash and hold the stick upright. Stick holders have a small hole and a tray below to catch ash. Cone holders are flat plates, sand-filled bowls, or specialty backflow burners for backflow cones. Without a proper holder, burning incense can scorch surfaces, drop hot ash onto flammable materials, or tip over. We sell incense holders and burners to match every stick and cone type.

Burn with caution and ventilation. Incense smoke contains fine particulates that sensitive pets — especially birds, cats with asthma, and small mammals — can react to. Always burn in a well-ventilated room where pets can freely leave. Keep incense out of small closed rooms and never near bird cages. Most dogs tolerate occasional incense burning with good airflow. Stop immediately if any pet shows respiratory distress (coughing, wheezing, hiding).

The easiest way: press the burning tip gently into sand, salt, or a bowl of water until the ember is fully extinguished. Alternatively, snap off the burning end over a heat-safe ash tray and dispose of it. Never leave incense burning unattended or blow on it (blowing can throw embers). Confirm no glow remains before walking away. Any incense can reignite if still smoldering — full extinguishment is critical.

Not ideal. Incense smoke displaces oxygen and accumulates in small closed rooms faster than most people expect. For bedrooms, open a window or crack a door before lighting. Burn for shorter sessions (15–20 min rather than a full stick), and allow 30+ minutes of airflow after the stick finishes. For a dedicated meditation or spa bedroom experience, a waterless diffuser with incense-profile oil is a smoke-free alternative.

Store incense in a cool, dry place — ideally in the original packaging or a sealed container, away from direct sunlight and humidity. Fresh incense retains its fragrance for 2–3 years when stored properly. Heat and humidity degrade the fragrance paste and can cause sticks to warp or cones to crumble. Never store incense in a bathroom (humidity) or a windowsill (UV).

Sticks: a bamboo or fragrance core rolled with aromatic paste — burns horizontally on a slanted holder, 20–60 min. Even, continuous smoke release. Traditional cones: solid fragrance paste pressed into a small cone — burns downward from the tip, 20–40 min. Good for localized scenting. Backflow cones: hollow-core cones that release heavier cooling smoke that flows downward through a decorative backflow burner — primarily for visual effect. Burn time is shorter, 10–15 min.